The basic operations of the high-voltage distribution cabinet panel include the following four points:
1、Closing and Opening Operations
●  When the high-voltage distribution cabinet panel is in the test position: To close the circuit, press the test closing button; to open the circuit, rotate the closing-opening changeover switch counterclockwise.
●  When in the working position: To close the circuit, rotate the closing-opening changeover switch clockwise; to open the circuit, rotate the closing-opening changeover switch counterclockwise.
2
、Energy Storage Operation
Before closing the circuit in the basic operation of the high-voltage distribution cabinet panel, the circuit breaker must be energized first. Turn the energy storage knob to the "On" position. The circuit breaker will automatically store energy after each closing, and the energy storage indicator light will illuminate once energy storage is completed.
3
、Local and Remote Control
●  When the local-remote control changeover switch is in the "Local" position, the closing and opening operations of the high-voltage distribution cabinet panel can only be performed on the cabinet panel.
●  When in the "Remote" position, the closing and opening operations can only be performed on the background interface.
4
、Heater and Lighting
●  The high-voltage distribution cabinet is equipped with a temperature and humidity controller. If the humidity inside the cabinet is high, turn on the heater knob to dry the cabinet interior.
●  To inspect the cable compartment, turn on the maintenance lighting and check the condition of the cable compartment through the observation window.
This article is edited and organized by DAYA Electric Group Co., Ltd. (https://www.hygraphics.com/). Please indicate the source when reprinting.